Tabla de contenido
26
Bugera 1960 INFINIUM
Bugera 1960 INFINIUM Mixing the Input Channels
Step 3: Mixing the
(EN)
Input Channels
Your Bugera 1960 INFINIUM possesses two gain
stages (controllable using the VOLUME 1 and
VOLUME 2 controls). Each gain stage yields different
sound characteristics: Channel 1 offers a brighter
tone with extra treble response, while Channel 2
exhibits a darker timbre. You can mix the two
channels' timbres in varying proportions by running
them in parallel, or you may cascade Channel 2
into Channel 1 in series for extra gain and preamp
saturation (a new feature available only in the
Bugera 1960 INFINIUM).
Revised input section
To help you more easily mix or cascade the channels,
your Bugera 1960 INFINIUM features a revised input
section. The new input scheme allows you to run
the channels in parallel or cascaded series using
only a single ¼" instrument cable. The inputs no
longer require an additional patch cable to link
the channels.
For more information about the options available
in this revised input scheme, refer to the
following table:
CHANNEL INPUTS
1
PARALLEL
2
1
CASCADED
HIGH
HIGH
HIGH
Input
2
Signal Path
LOW
Pad
0 dB
Channels 1 and 2 in parallel, single input
0 dB
Channels 1 and 2 in parallel, dual inputs
0 dB
Channel 2 only, Channel 1 deactivated
0 dB
Channel 2 cascaded into Channel 1, single input
0 dB
Channel 2 cascaded into Channel 1, dual inputs
-6 dB
Channel 2 cascaded into Channel 1, single low-gain input
Tabla de contenido
