Steelcase FrameOne Boundary Screen Instrucciones De Montaje página 11

9.
Use the spacers to create a
½" gap between the legs and the
Boundary Screen.
NOTE: The edge of the L brackets
should line up with the leg edge.
10.
Mark the locations for the pilot
holes in the leg. Then remove the
Boundary Screen from the FrameOne
assembly.
11a.
Use a center punch to stamp
each hole location.
11b.
Drill holes in the FrameOne
leg using 5/32" drill bit.
11b
BOUNDARY SCREEN
SPACER
11a
9
LEG
10
Page 11 of 63
76550 Rev B