Part Names And Functions Of The Remote Controller - Toshiba MMY-MAP0806HT8P-E Manual De Instrucciones

Ocultar thumbs Ver también para MMY-MAP0806HT8P-E:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
◆ Floor Standing Concealed Type
Air discharge
Earth screw
Equipped on the electrical
control box.
Air intake
Air in the room is taken in
through here.
◆ Floor Standing Type
Discharge louver
Controls discharge air directions.
Earth screw
Equipped on the electrical control box.
Air fi lter
Filters out dust
Air intake
Air in the room is taken in through here.
65-EN
1117102201-2_EN.indd 33
1117102201-2_EN.indd 33
– 33 –
Drain funnel (with strainer)
Accessory to be attached at the site
Air fi lter
Filters out dust.
(Inside the return air grille)
Front panel (lower)
Metal fi ttings
Vertical louver
Automatically directs the airfl ow
horizontally at regular intervals.
Drain pan
Water collected here is drained out
through the drain pipe.
Metal fi ttings (left/right)
3
Part names and functions of the remote
controller
This remote controller can control up to 8 indoor units.
Display section
All indicators are displayed in the display example below.
Actually, only the selected options will be displayed.
blinks on the display of the remote controller the fi rst time the
power switch is turned on.
• The initial settings progress while
is blinking. Start to use the
remote controller after
has disappeared.
NOTE
The LCD may temporarily be blurred due to static electricity.
1
7
8
9
2
3
4
5
6
22
14
15
17
1
SETTING indicator
Displayed when setting the timer or other
functions.
2
Operation mode indicator
Indicates the operation mode selected.
3
Error indicator
Displayed when the protective device activates or
an error occurs.
4
Time display
Indicates time concerning the timer.
(Indicates an error code when an error occurs)
5
Timer mode indicator
Displays the timer mode.
6
Filter indicator
Reminder to clean the air fi lter.
Display
section
TEMP.
ON / OFF
Operation
TIMER SET
FAN
MODE
TIME
SAVE
VENT
section
FILTER
RESET
TEST
SET
CL
SWING/FIX
UNIT LOUVER
18
19
16
10
20
11
21
12
13
7
TEST run indicator
Displayed during test run.
8
Louver position display
Indicates the louver position.
* Only for 4-way cassette, 1-way cassette, 2-way
cassette, ceiling types
66-EN
6/30/2559 BE 15:41
6/30/2559 BE 15:41
Tabla de contenido
loading

Tabla de contenido