Mellerware Cozy! Manual Del Usuario página 7

guarantee and the manufacturer's
liability null and void.
Description
A – Air outlet
B – Thermostat
C – Power II
D – Power I
E – OFF
F – Power I + oscillation
G – Power II + oscillation
If the model of your appliance does
not have the accessories described
above, they can also be bought
separately from the Technical
Assistance Service.
Instructions for use
BEFORE USE
Make sure that all products'
–
packaging has been removed.
Some parts of the appliance
–
have been lightly greased.
Consequently, the first time the
–
appliance is used a light smoke
may be detected. After a short
time, this smoke will disappear.
To eliminate the smell given off by
–
the appliance when used for the
first time, it is recommended to
have it on at full power for 2 hours
in a well-ventilated room.
USE
Extend the cable completely
–
before plugging it in.
Connect the appliance to
–
the mains.
Turn the appliance on, by using the
–
selection knob.
- Position I: the heater works at
a power of 1350W.
- Position II: the heater works at
a power of 2000W.
- Position: the heater works
at a power of 1350W and with
oscillation.
- Position: the heater works at
a power of 2000W and with
oscillation.
Turn the thermostat knob until it is
–
in the position that corresponds to
the desired temperature.
During the appliance's use, it will
–
come on and off automatically,
indicating the heating elements are
working, and therefore maintaining
the desired temperature.
ONCE YOU HAVE FINISHED USING
THE APPLIANCE
Select the minimum position (MIN)
–
using the thermostat control.
Stop the appliance, selecting
–
position OFF on the selector control.
Unplug the appliance from
–
the mains.
Clean the appliance.
–
ANTI-TIPPING SAFETY DEVICE
The appliance has an anti-tipping
–
safety device that turns it off if the
working position is not the
correct one.
EN ES