Display Window - Fimar EASYLINE BL008 Uso Y Mantenimiento

Technical information
Power (w)
Voltage
Speed (rpm)
Capacity (L)
Endurance of Container (°C)
Control Panel BL020
Power Switch
Located on the side of the Motor Base the ON/OFF switch
controls the power to the machine. With the machine
plugged in, switch the machine to ON to ready the
machine for blending.
ON/OFF Switch
Pressing START/STOP once starts and runs the machine
and turns the blades. Press the START/STOP button
again to stop the machine and the blades.
PRE-SET Time buttons
These buttons, 8S, 12S, 60S, 90S are pre-programmed
blending cycles designed for the most commonly made
drinks. Depending on the viscosity of the drink you are creating, pressing one of the PRE-SET Time buttons will run the
machine for a full cycle. The machine will stop by itself when the cycle is complete. A cycle varies in length, see the
Instruction on next page for a complete description of the range of each PRE-SET button. Due to the difference of recipes,
your results may vary.

DISPLAY WINDOW

This area show time to left and continue blending till all the number disappear.
HIGH/LOW PULSE button
These are pulse button, when you press H Pulse button, the machine will run with the highest speed, and when you press
L Pulse button, the machine will run with 60% of the highest speed. Every press will keep 0.5 seconds running.
IMPACT Button
It is a button which have pre-set a common program. Once press the button, blender will automatically run in a circle:
Ramp the blending speed to highest for 0.5 second, then stop for 1.5 seconds, then run again, ramp the blending speed to
highest speed for 0.5 second again, then stop for 1.5 seconds again. The machine will run this circle for 10 times, then
ramp to highest speed till the circle stop. The whole program last 30 seconds.
How to operate your blender using the PRE-SET Time buttons.
8S---(8 Seconds) Blends thin drinks with just juice and ice .
This program will quickly ramp to a high blending speed for 8 seconds.
12S---(12 Seconds) Blends light coffee drinks.
This button will ramp the blending speed to highest speed for 6 seconds, then ramp down to medium speed for 6
seconds.
30S---(30 Seconds) Creates a specialty drink with a thick viscosity.
This button runs at a highest speed for 15 seconds, then ramp down to medium speed for 15 seconds.
60S---(60 seconds) Blend a regular smoothie for an extended cycle.
This button runs for 30 seconds on a highest speed and then decrease in speed and runs on medium speed for
30 seconds.
BL008
1000
BL020 BL020B
1500 1500
230V ~ 50/60Hz
28000
2
-40~180
2
BL021
1500