Safety Measures; Important Safeguards - Fimar EASYLINE BL008 Uso Y Mantenimiento

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
Safety measures 
READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING.
Please read and understand this entire manual before attempting to assemble, operate or install the product. This manual
contains important information about the assembly, operation and maintenance. General safety information is presented in
these first few pages. Please keep this manual for future reference and to educate new users of this product.
When using an electrical appliance, basic safety precautions should always be followed, otherwise,
the potential risk of fire, electric shock and/or injury will be occurred.
When using electrical appliances, basic precautions should always be followed, including the following:
1. Read the instructions carefully.
2. To protect against risk of electrical shock, do not put the appliance in water or other liquid.
3. Adult supervision is quite necessary when the appliance is used by or near Children.
4. Unplug the power cord from the wall outlet when the appliance is not in use, before putting on or taking off parts, and
before cleaning other than washing the container.
5. Never touch moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or
damaged in any manner. Call service at once for possible replacement, test and repair, electrical or mechanical
adjustment.
7. Do not use outdoors.
8. Do not let the power cord hang over the edge of a table or counter, or get in contact with hot surfaces.
9. Keep hands and utensils out of the container during operation to prevent the possibility of severe personal injury
and/or damage to the blender. A rubber scraper may be used, but only when the blender is not running
10. Please take off the cup after you make sure the blending blade is stopped entirely.
Blade is sharp. Handle carefully.
Never try to remove blade while container is sitting on the motor base.
Do not operate with loose, knicked or damaged blades.
To reduce the risk of personal injury, never place blade assembly on motor base without blender container
properly attached.
Always operate with the lid in place.
Display window area will scratch when contacted with a scouring pad or sharp object. Use a soft cloth to wipe
the control panel area clean.
SAVE THIS INSTRUCTION.

IMPORTANT SAFEGUARDS

CAUTION
1
Tabla de contenido
loading

Este manual también es adecuado para:

Easyline bl020Easyline bl020bEasyline bl021Easyline dmb20

Tabla de contenido