Maintenance; Spare And Wearing Parts; Replacing The Securing Lever - Bosch 0 986 613 670 Manual De Usuario

en

14 | 0 986 613 670 | Maintenance

5. Maintenance
5.1

Spare and wearing parts

Denomination
Parts set – securing lever
Parts set – mounting mandrel
Receiving sleeve
<)
Wearing parts
<)
5.2

Replacing the securing lever

1. Loosen the screw in the hole in the securing
lever (item 1, Fig. 8) 1/2 turn.
3
2
1
Fig. 8: Screw in securing lever
1 Screw in hole in securing lever
2 Swivel axis
3 Spring
2. Push out the swivel axis (item 2, Fig. 8).
3. Remove the spring (item 3, Fig. 8) and the
securing lever.
4. Assemble a new securing lever and new
spring as shown in Fig. 9.
Fig. 9: Spring on securing lever
5. Position the securing lever with spring in the
mounting lever as shown in Fig. 10.
|
1 689 989 325 2018-06-08
Order number
S P04 001 926
<)
S P04 001 927
S P04 001 919
Fig. 10: Positioning the securing lever with spring
6. Push the swivel axis through the hole in the
mounting lever.
Fig. 11: Positioning the swivel axis
7. Tighten the screw in the hole in the securing
lever (item 1, Fig. 8).
Checking the new securing lever for proper
function
1. Pull the securing lever toward the back and
push the mounting lever all the way down.
1
2
4511001-22_shd
Fig. 12: Mounting lever pushed down all the way
1 Mounting lever
2 Securing lever
4511001-20_shd
Robert Bosch GmbH