Safety Warnings - Marmitek MEGAVIDEO55 EXTRA RECEIVER Modo De Empleo

SAFETY WARNINGS

• To prevent short circuits, this product should only be used inside and only in dry spaces.
Do not expose the components to rain or moisture. Do not use the product close to a
bath, swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures or bright
light sources.
• Do not open the product: the device contains live parts. The product should only be
repaired or serviced by a qualified repairman.
• In case of improper usage or if you have opened, altered and repaired the product
yourself, all guarantees expire. Marmitek does not accept responsibility in the case of
improper usage of the product or when the product is used for purposes other than
specified. Marmitek does not accept responsibility for additional damage other than
covered by the legal product responsibility.
• This product is not a toy. Keep out of reach of children.
• Adapters: Only connect the adapter to the mains after checking whether the mains voltage
is the same as the values on the identification tags. Never connect an adapter or power
cord when it is damaged. In that case, contact your supplier.
SETTING THE INFRARED RETURN CHANNEL FOR
USING REMOTE CONTROL
This receiver can be fitted between the TV and the aerial signal. The receiver converts
the infrared signal from your remote control and sends this signal back to the
modulator through the aerial cable. Works with almost all brands and models of
remote controls (except B&O).
Using the supplied infrared eye you can convert this back to an infrared signal and send
it to the connected appliance. In this way you can operate the connected appliance
(e.g. a DVD player) from another room. It is easier to connect this if someone helps
you.
1. Disconnect the aerial cable connected to the back of your TV. Connect this to the
'ANT IN' / 'In' connection on the metal part of your infrared receiver.
2. Reconnect the 'TV OUT' / 'To TV' side to your TV. You can use the supplied
adaptors for this (F connector to IEC).
3. Position the red plastic part containing the infrared receiver where it can be seen
from where you want to use your remote control. Avoid direct sunlight or light
from a plasma screen.
4. Connect one of the two supplied transformers to the metal part of the IR receiver.
MEGAVIDEO55 EXTRA RECEIVER
TM
3