Safety Warnings; User Manual - Marmitek IR Control 10 XTRA Modo De Empleo

SAFETY WARNINGS

x
To prevent short circuits, this product should only be used inside and
only in dry spaces. Do not expose the components to rain or moisture.
Do not use the product close to a bath, swimming pool etc.
x
Do not expose the components of your systems to extremely high
temperatures or bright light sources.
x
In case of improper usage or if you have altered and repaired the
product yourself, all guarantees expire. Marmitek does not accept
responsibility in the case of improper usage of the product or when the
product is used for purposes other than specified. Marmitek does not
accept responsibility for additional damage other than covered by the
legal product responsibility.
x
This product is not a toy. Keep out of reach of children.
x
Do not open the product: the device may contain live parts. The product
should only be repaired or serviced by a qualified expert.
x
Only connect the adapter to the mains after checking whether the
mains voltage is the same as the values on the identification tags.
Never connect an adapter or power cord when it is damaged. In that
case, contact your supplier.
1. INTRODUCTION
Congratulations on your purchase of the IR Control 10/11 XTRA™. With it
you can extend the IR (infrared) signals of remote controls. The IR Control
10/11 XTRA™ makes it possible to operate A/V devices while these are in a
closed cupboard or when your A/V equipment is out of sight.
2. SET CONTENT
1 x IR Module
1 x IR Receiver
The IR Control 10 XTRA™- contains an surface mount IR Receiver
The IR Control 11 XTRA™- contains a panel mount IR Receiver
2 x IR Extension cable with one IR blaster LED
1 x IR Extension cable with two IR emitter LEDs
1 x AVR connection cable
1 x Power adaptor
1 x Manual
IR CONTROL 10/11 XTRA™ 3