Ambu SAM Manual Del Usuario página 9

C. Chemical disinfection can also be performed using recognised disinfectants suitable for
use with polyvinylchloride (PVC). The supplier's directions on dosage and disinfection
period should be closely followed.
D. Always rinse the items in clean water after disinfection and allow to dry before storing.
NOTE: The face pieces must not be exposed to boiling, autoclaving or gas sterilisation.
6.3 Cleaning of skull, neck and body
The skull, neck and body of the Ambu SAM should be wiped over with a cloth moistened
in a mild detergent and then wiped over once more using a cloth moistened in clean
water.
Marks on the Ambu SAM left by lipstick or a ball pen can penetrate the material and
should therefore be removed as quickly as possible using alcohol.
6.4 Assembly of face piece (see picture ⑩)
Assemble the face piece by fitting the dental insert as shown and press it into the face
piece so that only the flange and collar remain outside, see picture 10.1.
First, press the collar of the dental insert into the slot on one side of the face piece.
Next, take the edge and force it over the flange on the dental insert until the flange is
seated in the slot in the mask all the way round, see picture 10.2.
8