Environmental Conditions - Techne N ICE Manual Del Usuario

6. Plug the mains cable into the socket on the back of the instrument.
7. Switch on the instrument. Symbols on or near the power switch of the unit have the following
meanings:
replacemeNt caBle
Should the mains lead need replacement, a cable of 1mm 2 of harmonized code H05VV-F connected to an
IEC320 plug should be used. If IN douBt coNsult a QualIfIed electrIcIaN.

eNVIroNmeNtal coNdItIoNs

The Nº ICE is designed to operate under the following conditions:
• Indoor use
• Ambient temperature range +5ºC to +40ºC
• Altitude to 2000m
• Relative humidity not exceeding 80%
• Mains supply fluctuations not exceeding 10%
• Over voltage category II IEC 60364-4-443
• Pollution degree 2
Note: The control specifications are quoted at an ambient temperature of 20ºC. The specification may
deteriorate outside an ambient temperature of between 10ºC and 30ºC.
The instrument has been tested for radio frequency interference and is certified under EN61326.
guaraNtee
The instrument is guaranteed against any defect in material or workmanship for the period specified on the
enclosed guarantee card. This period is effective from the date of purchase; within this period all defective
parts will be replaced free of charge provided that the defect is not the result of an accident, misuse or
negligence. Servicing under this guarantee should be obtained from the supplier of the instrument.
This manual has been prepared for the convenience of Techne's customers and nothing in this manual
shall be taken as a warranty, condition or representation concerning the description, merchantability,
fitness for purpose or otherwise of the unit or components.
Notwithstanding the description and specification(s) of the instruments contained in the operator's
manual, Techne reserves the right to make such changes as it sees fit to the instruments or to any of the
components.
I Mains Switch On
o Mains Switch Off
7