Idiomas disponibles
Idiomas disponibles
Electronic Ignition Module Replacement Steps
IMPORTANT! Before beginning the Electronic Ignition Module replacement procedure, ensure that your grill is cool and the
control knob is in the OFF (
before beginning the replacement of the Electronic Ignition Module. Retain your hardware for use in reassembling your grill.
Step 1 - Remove LP Cylinder and Grease Tray.
Step 2 - Remove Battery Cap and Battery
Retain your battery for reuse.
Step 3A - Remove Electronic Ignition Module Wiring
Pull all three (3) wires from the Electronic Ignition Module.
Step 3B - Remove Electronic Ignition Module Wiring (continued)
Remove the electrode wire from the electrode. Discard this wire.
/
) position. Read through this entire procedure to familiarize yourself with the steps
OFF
Electronic Ignition
Module
Electrode
3
1
2
3A
3B
