English - Scott NERO PLUS Manual Del Usuario

SCOTT NERO PLUS | BHEL1801 HELMET
This helmet was developed solely for bicyclists. This helmet is not suitable for moped rid-
ers, motorcyclists, or any other applications. The SCOTT Nero Plus | BHEL1801 Helmet has
a CPSC marking and complies with the safety standard required for the United States Con-
sumer Product Safety Commission ; a CE marking that indicates it conforms to Regulation
EU 2 016 / 4 25 for the PPE Category II ; a ASTM marking that indicates it conforms to ASTM
F1952-15 Downhill standards for Downhill Mountain Bicycle racing. According to standard
EN 1 078 : 2 012 the peak acceleration of this helmet for each impact does not exceed 250 g .
• I. INTRODUCTION
Please carefully read all instructions regarding the application, use, storage, care, clean-
ing, and safety of your helmet. This helmet is based upon the latest technologies in order
to guarantee maximum protection. These instructions are an important part of the prod-
uct and must be kept for future reference. Intensive tests guarantee that SCOTT helmets
comply with the diverse regulations of international safety standards in the areas of shock
absorption, breakage, and shell damage. You will find the corresponding safety labels and
notes in the interior of your helmet.
• II. SAFETY
Read through these warnings :
1- The intended and reasonably foreseeable use of this helmet is only : bicyling. IT IS NOT
INTENDED TO BE USED FOR MOTOR SPORTS, ON MOPEDS OR FOR OTHER USES.
2- This helmet, and bike helmets in general, are constructed in such a way that the helmet
shell is partly destroyed upon impact in order to absorb impact energy and to protect
your head. Therefore the helmet has to be replaced and destroyed after it has sustained
a significant blow, even if no damage is noticeable. Please also keep in mind that the
material of the helmet can be penetrated by sharp objects.
3- No helmet can protect the user from all injuries in all accidents, in particular in collisions
with motor vehicles. Depending on the strength of impact, even an accident at very low
speeds can cause significant injuries or death.
4- This helmet was developed to protect your head. It does not offer protection from inju-
ries to the neck, the spinal column, or other body parts capable of being affected by an
accident.
5- Do not modify or remove any of the original parts of your helmet in any way contrary to
the recommendations by SCOTT. Exposure to sunlight may cause colour fading. SCOTT
Sports SA shall not be liable for any damages and losses due to improper use. Some
SCOTT helmets are equipped with a detachable visor system. These systems ensure that
the visor immediately disengages in the case of a fall or other impact events. The attach-
ment of these visors does not damage the material of your helmet in any way.
6- The helmet should not be worn by children while they are climbing or engaging in other
similar activities, as the risk exists whereby the helmet straps could choke the child.
7- This product has a limited lifespan and for optimum safety SCOTT recommends replac-
ing your product three (3) years after purchasing date. SCOTT shall not be liable for
damages arising from the use of a helmet which should have been replaced.
8- This product is not a toy. It is sports equipment and is designed and intended for sports.

ENGLISH - 4