Weight & load limits
are determined by the
customer/installer and will
vary depending upon the
placement of the Landing
Pads and the strength &
construction of the material
they are attached to.
RECoMMENDED TooLS:
• Tape measure
• #2 pencil, drill
• 1/8" drill bit
• 1/4" drill bit
• punch
• eye protection.
Refer to YAKIMA SkyLine or Control Tower instructions for important
warning and load limitations, and YAKIMA's limited warranty.
1033033C-1/12
LANDING PAD 6
properly and securely attached
attachment could result in an
automobile accident, and could
cause serious bodily injury or
death to you or to others. You
are responsible for securing
attachments prior to use, and
products for adjustment, wear,
and damage. Therefore, you
must read and understand all
of the instructions and cautions
product prior to installation or
use. If you do not understand
mechanical experience and
are not thoroughly familiar with
INCLUDED TooL:
you should have the product
5 mm Allen wrench
IMPoRTANT WARNING!
It is critical that all yakima
racks and accessories be
to your vehicle. Improper
the racks and accessories
to your car, checking the
periodically inspecting the
supplied with your yakima
all of the instructions and
cautions, or if you have no
the installation procedures,
installed by a professional
installer such as a qualified
garage or auto body shop.