Machine Installation; Circular Saw - Far Tools CM 250 Manual De Instrucciones

MACHINE INSTALLATION

Remove the protective coating from the working tables and other parts of the machine either with paraffin
oil or any similar solvent, do not use petrol or similar solvents for this activity –they might cause reduced
corrosion resistance of certain parts of the machine.
Il est fortement conseillé d'utiliser un aspirateur à copeaux type «FARTOOLS AB 1500, ref 113245».
Renseignez vous auprès de votre point de vente.
Working area :
It is important to maintain free area of 1 m around the machine, which is required for the working place.
CONNECTION OF THE EXHAUSTION SYSTEM
Work on the machine only with the exhaustion system running! Use flexible exhausting hoses with diameters
equal to 100 mm and 40 mm.
exhausting hoses are connected to exhausting sockets whose location on individual machines is as follows:

Circular saw :

The upper exhaustion unit from the circular saw is connected to the socket placed on the disc cover.
The diameter of hole (B) is 32 mm.
The bottom exhausting unit is led out on the lower rear part of the machine (A).
B
A
113752-Manuel-A-EN .indd 16 10/04/07 16:10:54