Basic Sanindusa 542737111 Instrucciones De Montage Y Manutencion página 52

//TROUBLE SHOOTING
INDICATOR
Red light in the sensor flashes when user's hands are within the sensor's range.
CAUSE
The water supply pressure is higher than 8 bar.
SOLUTION
Reduce the water supply pressure.
Water flow from spout does not stop
INDICATOR
Sensor flashes when user's hands are within the sensor's range.
CAUSE
Debris or scale in diaphragm or the diaphragm is torn.
SOLUTION
Clean the orifice or replace diaphgram.
* ithe faucet will automatically shut off after 90" sec. [security mode]
52//53