Basic Sanindusa 542737111 Instrucciones De Montage Y Manutencion página 46

//RANGE ADJUSTMENT
b) Adjusting the sensor with a remote control - optional:
In order to adjust the sensor with a remote control you should hold the remote control straight in front of the
sensor at distance of about 4"(10cm). Choose the function you want to adjust by pressing once on one of the
function buttons. After pressing on a specific function button, a quick flashing of the red light at the front of
the sensor will occur. At this stage, you can change the adjustment by pressing the time (+) or (-) buttons, every
push will increase or decrease one level.
Range :
Presse (+)to increase detection range and (-) to decrease the detection range of the sensor.
The remote control can also be used to adjust :
Flow time (security time):
Press (+) to increase the security time and (-) to decrease it.
Delay in :
Changes the time the water will start flowing when the user's hands are within the sensor range. Press (+) to
increase it and (-) to decrease it.
Delay out :
Changes the time of water flow after the user's hands are removed. Press (+) to increase it and (-) to decrease
it.
46//47