en-us | 48 | 3336A
3 Operating Instructions
1.
Check the lifting tackle for visible damages such as
signs of wear, deformation, breakages, cracks, and
corrosion damages prior to each use. Check all
threads for damages. Do not use the lifting tackle
when defects are noted and discard it immediately.
2.
Bring the guide bar (2) and the holding device (4)
into the position described in the workshop
manual. Ensure that the center of gravity is in
accordance with the workshop manual section
relevant for the load to be lifted.
3.
Ensure that the locking bolt (3) is engaged.
4.
Fasten and secure the lifting tackle to the gearbox
as described in the workshop manuals. Tighten the
screw connection (5) with 25 Nm.
WARNING
Danger through tilting, swiveling, or falling of the
load!
Incorrect attachment of the lifting tackle on the
load may result in a tilting, swiveling, or falling load.
This could result in serious injuries and severe
damage to materials.
Attach the gearbox exactly as described in the
workshop manuals.
5.
Suspend the lifting tackle with the suspension eye
(6) on the hook of a workshop crane (e.g. VAS
6100) approved by Volkswagen as described in the
workshop manuals.
WARNING
Risk through falling load!
Incorrect attachment of the lifting tackle may result in
a tilting or falling load. This could result in serious
injuries and severe damage to materials.
Fasten the lifting tackle to the workshop crane
exactly as described in the workshop manuals.
Observe the operating manuals of any accessories
used.
Check the secure fit of the lifting tackle 3336A prior
to lifting the load.
6.
Carry out further work as described in the
workshop manuals.
7.
Ensure that all parts of the special tool have been
removed after completing the repair work.
2018-09-04
4 Inspection and Maintenance
Check the lifting tackle for completeness, and visible
damages such as signs of wear, deformation,
breakages, cracks, and corrosion damage prior to
each use. Do not use the lifting tackle when defects
are noted and discard it immediately.
Spare parts are available on request. Use only
original replacement parts.
Please contact your 1st level support representative
with any queries.
NOTICE
Modifications to this product which have not been
expressly approved by the manufacturer will void any
warranty. The manufacturer assumes no liability for
personal injury or damage to materials which occur as
the result of improper use of this product.
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany
Capítulos
