Eldom allmi C500 Manual De Instrucciones página 9

PARTS
1. Outlet
2. Cover
3. Handle
4. Panel
5. Water level indicator
6. Base
7. Illuminated jug
SPECIFICATION
- Power output: 2000 W
- Power supply: 230 V ~ 50 Hz
- Capacity 1.7 l
INTENDED USE
The C500 wireless kettle is intended for boiling water. It is fitted with the function of temperature control and
hold.
The capacity of the kettle allows to boil 0.5–1.7 l of water. The maximum and minimum level of water is marked
with the indicator (5).
OPERATION
All changes of settings are confirmed with audible signal.
Place the base of the appliance (6) on flat, stable and dry surface.
Excess cord may be kept inside the base. Make sure that the cord protrudes from the base (6) through the special
groove to have the appliance stable.
Boil water 2-3 times and discard before the first use of the kettle.
Fill in the appliance after opening the cover (2).
Do not fill in the kettle while on the base.
The kettle will be activated after pressing the button (A).
Operation of the appliance is signalled with illumination of the jug (7).
The kettle will be automatically turned off when the water is boiled. The appliance may be turned off at any time
with the button (A).
TEMPERATURE CONTROL
The kettle allows to warm up water to the pre-set temperature.
To select the required temperature of water (50°C, 70°C, 80°C or 90°C), press the button (B) to cause illumination
of the relevant indicator on the panel (4).
Then press the button (A).
Operation of the appliance is signalled with illumination of the jug (7). Illumination colour depends on the
selected temperature.
When the pre-set temperature is reached, the kettle will turn off.
Note. Taking the kettle off the base cancels the settings.
ILLUMINATION
50°C: green light.
70°C: blue light.
80°C: purple light.
90°C: yellow-green light.
OPERATING INSTRUCTION
CORDLESS KETTLE C500
1
5
7
6
2
3
50 70 80 90
100 C
o
4
A
EN
C
o
B
•
EN 9