Tabla de contenido
Installation Instructions for P4 LGA775RM & Cooler
ARM
Side A
Side B
CAM
Figure 1
Plastic
Washers
Figure 2
Figure3-2
Figure3- 1
GH-PCU22-VG
Figure 1
Place the LGA775RM onto the LGA775 motherboard so that
side A is parallel with ARM and side B is parallel with CAM.
Figure 2
From the underside of the motherboard, use screws (4) and
plastic washers (4) together to secure the LGA775RM into
place.
Figure 3
Gently push down on the cooler unit to lock it into position.
(Figure3-1).Connect the yellow 3-pin connector cable of the
cooler to the CPU fan connector located on the motherboard.
(Figure 3-2).Installation is now complete.(Figure 3-3).
Note: About P4 Clips installation, please refer to
Figure3-3
"Installation Instructions for Intel Pentium 4 Clips"
- 10 -
Capítulos
Tabla de contenido
