Tabla de contenido
Installation Instructions for Intel Pentium 4 Clips
Figure 1
Figure 2
GH-PCU31-SD
Figure 1
Please add an adequate layer of heat sink paste on the surface
of the CPU.
Figure 2
Figure showing the correct installation of the cooler atop the
CPU.
Figure 3
Hook the clip on one end of the cooler with the insert space at
the CPU base (as seeing left Figure 3).Firmly push downwards
to clip the cooler end in place. Do the same for the other clip of
the cooler to secure cooler in place.
Figure 3
Figure 4
Connect the 3-pin connector to the CPU fan connector on the
motherboard. Installation is now complete.
If fan speed control is required, please refer to
Figure 4
"Installation of the Fan Speed Control Cable".
- 6 -
Capítulos
Tabla de contenido
