Intended Use - Eldom wallo HL20 Manual De Instrucciones

INSTRUCTION MANUAL
EN
ELECTRIC HEATER HL20
GENERAL DESCRIPTION
1. Adjustment of blowing force
2. Adjustment of temperature
3. Display
4. Timer
5. Switch
6. Air intake
7. Air exhaust
8. Lock
9. Rotating plug
SPECIFICATION
- power consumption: 400W
- power supply voltage: 220-240V ~ 50Hz
- area: 23 m
2
- temp. adjustment: 15-32

INTENDED USE

The HL20 radiator is intended for rapid heating of the premises with the area of up
to 23 m . Its small size makes it useful in both home and travel applications.
2
INSTALLATION
• After unpacking the appliance, make sure that it was not damaged during the
transport. In case of any doubts, refrain from its use until contacting a service
point.
• Set the switch (5) in the "O" position (switched off),
• Connect the appliance directly to the power supply compatible with the
parameters stated above.
• The plug (9) after pressing the lock (8) may be rotated to fit to the socket.
• The appliance may be operated vertically or horizontally.
• At least 1 m of free space should be left around the appliance.
• On the first starting up of the heater, specific odour may be emitted from the
heating elements and insulation. It is a typical situation.
Do not cover the exhaust openings when the appliance is operated.
10 EN
1
7
6
C
O
2
3
4
5
8
9