Rimage 2000i Serie II Guia Del Usuario página 14

Operate the Rimage 2000i Series II
Set the Printable Area
This functionality allows you to adjust the non-printable area, or mask
settings, for standard CD/DVD/BD 120 mm media. The mask settings allow
you to control the outer and inner diameters so that the printed image
does not overlap the disc edges. If you print on areas of the disc where the
surface is not suitable for printing, the ink can smear or run.
Access Printing Preferences. Refer to page 9.
1.
2. Select the Mask Settings tab.
3. Measure the printable area and adjust the settings.
• If you use hub printable discs with a stacking ring:
a. In the Hub Area Settings box, select the Printing on Hub
checkbox to print on the disc hub.
Some older discs have a printable hub and a gap for the stacking
ring. If you have media like this, use the following printable
areas:
Standard Area
• Outer Diameter 118 mm
• Inner Diameter 38 mm
Hub Area
• Outer Diameter 35 mm
• Inner Diameter 24 mm
b. Measure the inner diameter of
the printable surface.
c. In the Hub Area Settings field, enter the inner diameter that you
measured in step b.
d. Measure the outer diameter of the printable hub area.
e. In the Hub Area Settings field, enter the outer diameter that
you measured in step d.
2002760_A
Disc with Stacking Ring
For more information visit
f. Measure the inner diameter of the standard printable area.
g. In the Standard Area Settings field, enter the diameter that you
measured in step f.
• If you use hub-printable discs without a stacking ring:
a. Measure the inner diameter of the
printable surface.
Most discs like the one shown above
have the following printable areas:
• Outer Diameter 118 mm
• Inner Diameter 24 mm
b. In the Hub Area Settings field,
change the Outer Diameter and
Inner Diameter settings to the value
measured in step a before changing
any other diameter settings.
c. In the Standard Area Settings field,
change the Inner Diameter to the same
value used in step b.
4. Select Apply to use your changes.
5. Select OK. The Preferences window closes.
Align the Ink Cartridges
For optimal print quality and maximum printing speed, use the following
procedure to align the ink cartridges.
Access Printing Preferences. Refer to page 9.
1.
2. Load a disc (Qty. 1) in the printer.
a. Press . The printer tray opens.
b. Place a 120 mm white disc (Qty. 1) on the tray.
rimage.com/support
Disc without Stacking Ring
11