Position Of Important Information - Piusi P 3.5 Serie Instalación Uso Y Mantenimiento

To open the cardboard packaging, use a pair of scissors or a cutter, being careful not to
damage the dispensing system or its components. Open the packaging and check that the
components provided as part of the equipment are available.
WARNING
Check that the data on the plate correspond to the
desired specifications. In the event of any anomaly,
contact the supplier immediately, indicating the
nature of the defects. Do not use equipment which
you suspect might not be safe.

POSITION OF IMPORTANT INFORMATION

8.
An adhesive label showing the operator the most
important information is affixed to the dispensing
system. Check that this label does not deteriorate
over time or come off. The label shows the
following information relating to use:
close-fitting
clothing
safety
goggles
Stamp on the bottom of the pump,
or on the pick-up hose, showing
information about the device.
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
protective
gloves
safety
shoes
PIUSI SPA - MADE IN ITALY
PIUSI P 5.5 - ST F0021401A
SERIAL N. 0123456789
CE EAC
PIUSI P 3.5 - PIUSI P 5.5
NOTE
In the event that one or more of
the components described below
are missing from inside the package,
please contact PIUSI S.p.A.
technical support.
NOTE
If all or part of the label
deteriorates or comes off,
please contact our customer
care department to ask for a
replacement.
Consult
"Installation, use
and maintenance"
manual
9 /124