Cleaning And Maintenance; Environmental Protection - Eldom frosty TL100N Manual De Instrucciones

CAUTION.
Do not plug both power cables at the same time.
Changing the supply mode when the appliance is in operation can lead to damage of the
appliance and loss of the guarantee.
Do not change the HOT or COLD function during the operation of the appliance. The
function can be changed 30 minutes after the appliance has been switched off.

CLEANING AND MAINTENANCE

- Before cleaning, plug the power cable out and wait till it defrosts or cools entirely.
- Do not rinse the appliance or immerse it in water.
- Do not clean with sharp, abrasive clothes or sponges as it may cause damage to the
appliance.
- The casing and the inside can be cleaned with a damp cloth and should be dried with
clean, dry cloth afterwards.
TIPS
- Foodstuffs should be stored in additional wrapping, which will secure them against
direct exposure to frost, condensation or smell diffusion.
- In case of car supply, during the stopover (engine turned off ) do not supply the fridge
from the lighter socket longer than 3 hours. Longer operation can cause excessive
discharge of the battery.
- Change of temperatures inside the isolated container (frequent opening or switching
off ) leads to natural effects of frost or condensation that can be visible on the inside
walls, under the lid or directly on the food.
- The optimal temperature inside the isolated container is achieved usually between 2-4
hours from the moment of switching the appliance on, provided that some constant
external parameters are maintained.
- The appliance is not designed for cooling warm or hot foodstuffs.

ENVIRONMENTAL PROTECTION

The appliance is made of materials which can be recovered or recycled. The blanket
should be handed over to the appropriate centre of collection and recycling of electrical
and electronic equipment.
WARRANTY
- the appliance is intended for personal use at a household,
- it is not intended for professional purposes,
- in case of misuse, the warranty is rendered null and void. Warranty terms and conditions:
see the attachment.
12|EN