Operating The Appliance - Eldom frosty TL100N Manual De Instrucciones

not comparable.
The appliance cools to 15°C below the ambient temperature. It heats up to circa 60°C.
In order to achieve the optimal cooling effect it is recommended to put non-frozen
products inside the appliance. The cooling process lasts from 2 to 3 hours.
This appliance is not designed for heating cold products but for preserving the high
temperature of hot meals.
Provided the appliance is operated properly and in accordance with these instructions,
the temperature can be maintained for many hours.
Handle (1) prevents the lid from opening. Opening the lid (3) is possible only when the
handle is folded.

OPERATING THE APPLIANCE

The fridge can be supplied with both 12 V or 230 V voltage using the provided power
cables (4) and (5) without additional accessories.
ALTERNATING CURRENT SUPPLY 230 V
- Move the lid of the control panel and power cord storage compartment (2) as indicated
- Remove the cord (5) from the power cord storage compartment trough the special
groove (6)
- Before switching the appliance on pull the switches (B) and (C) into the "OFF" position
(appliance switched off ).
- Plug the appliance in.
- Pull the switch (C) in the ECO/MAX position.
- Chose the function with the switch (B):
- "COLD" position – COOLING. Signalized with the green control light.
- "HOT" position – HEATING. Signalized with the red control light.
ECO function works only when the device is connected to the alternating current 230V
power.
The output is reduced in the operating mode ECO. Use this operating mode when there
are smaller loads in the cooler box, for example.
DIRECT CURRENT SUPPLY 12V (CAR SUPPLY)
- Move the lid of the control panel and power cord storage compartment (2) as indicated
- Remove the cord (4) from the power cord storage compartment trough the special
groove (6)
- Before switching the appliance on pull the switches (B) and (C) into the "OFF" position
(appliance switched off ).
- Put the power cable plug (4) into the lighter socket.
- Chose the function with the switch (B):
- "COLD" position – COOLING. Signalized with the green control light.
- "HOT" position – HEATING. Signalized with the red control light.
The appliance can be switched off any time by pulling the switch „B" into the "OFF"
position.
EN|11