Polaroid 345AF Manual Del Usuario página 6

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
Power Save Function
If the camera is not in use for over 60 seconds, the camera will turn off
automatically to save battery power. To re-activate the camera, press the
Shutter-Release Button lightly or close and then re-open the lens cover.
About the Film Speed
The camera is designed to use DX-coded ISO100, ISO200 or ISO400 fi lm. When
the fi lm is loaded, the camera automatically sets the correct fi lm speed by reading
the black-and-silver pattern on the fi lm cassettes.
Loading The Film
1. Open the fi lm compartment door by pressing upward on the Film Door Latch
and gently lift open the fi lm compartment door. (Fig. 3)
2. Insert the fi lm into the Film Chamber (Fig. 4), pull out the fi lm leader to reach
the Film Take-up Spool Teeth (Fig. 5).
3. Make sure the fi lm perforations engage the Sprocket Gear, and the fi lm lies
evenly between the guide rails (Fig. 5 & 6)
4. Close the door. The Film Counter Window will show "S". Slide the
Lens Cover Switch to turn the camera on (Fig. 8) and press the
Shutter-Release Button until the Film Counter Window shows "1".
(Fig. 7) Your camera is now ready to take your fi rst picture.
345AF (515055-00)_ENU.indd 4
345AF (515055-00)_ENU.indd 4
- 4 -
11/1/04 10:51:38 AM
11/1/04 10:51:38 AM
Tabla de contenido
loading

Tabla de contenido