Rewinding the Film
When the end of the fi lm is reached, the fi lm will not advance when you press the
Shutter-Release Button.
1. Slide the fi lm Rewind Switch in the direction as indicated by the arrow. The
switch latches in this position and the fi lm is rewound automatically. (Fig. 16)
2. To rewind the fi lm in mid-roll, slide the fi lm Rewind Switch in the direction as
indicated by the arrow. (Fig. 16)
3. When rewinding is complete, the motor stops automatically. Open the Film
Compartment Door and remove the fi lm for processing. (Fig.17)
Do not open the Film Compartment Door if the fi lm is not completely
rewound, otherwise the fi lm may be ruined.
Precautions
-
Store the camera in a cool, dry place;
-
Do not expose the camera to heavy dust or water;
-
Do not expose the camera to extreme high or low temperature and humidity (they may cause
serious damage to the camera);
-
Do not attempt to disassemble the camera by yourself (to avoid risk of electronic shock);
-
Avoid excessive force or impact caused by handling, bumping or dropping;
-
Do not break up the batteries or throw them into fi re;
345AF (515055-00)_ENU.indd 8
345AF (515055-00)_ENU.indd 8
- 8 -
11/1/04 10:51:40 AM
11/1/04 10:51:40 AM