English
2. Turning the Speaker On/Off
• To turn on The Speaker, press and hold the Power button until the Blue LED starts flashing.
• To turn off The Speaker, press and hold the Power button until the Blue LED turns off.
3. Bluetooth Pairing
• The Speaker automatically enters Bluetooth pairing mode once powered on.
• Turn on the Bluetooth function on your device and select the speaker name "Harmony" in
the available devices list.
• Some Bluetooth devices may require you to enter a passcode to pair your device to The
Speaker. Enter "0000" and press submit.
4. FM radio
• Press the Mode button to switch to FM Radio.
• Short Press the pause button for automatically scanning the available frequencies.
• While in FM mode connect the speaker to a charging outlet, as it can enhance the signal.
5. Playing Music via Auxiliary Connection:
• Connect your device to The Speaker via the 3.5mm Aux cable provided.
• The speaker will automatically enter auxiliary playback mode.
• Then select the track you wish to play from your connected device.
6. Playing Music via MicroSD Card
1. Insert a microSD card into the microSD card slot on The Speaker.
2. The speaker will automatically enter MicroSD playback mode and start playing the first
song on the MicroSD card.
3. Use the Track Control buttons to traverse through the multiple files on the MicroSD card.
7. Controlling Music Playback (Only under Bluetooth & microSD card mode)
• Skip to the next track by pressing the "Volume Decrease" button.
• Skip to the previous track by pressing the "Volume Increase" button.
8. Hands-Free Call
• Pressing the "Mode Button" will answer an incoming call.
• Pressing the "Mode Button" will disconnect an ongoing call.
Troubleshooting
1. The Speaker does not pair with a Bluetooth device:
• Check if the Bluetooth hardware on your device supports A2DP profile which is necessary
for sound transmission over Bluetooth.
4
