Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1. Put the desired amount of coffee grounds into Coffee Filter and place Coffee Filter inside
the Filter Basket.
2. Pour the desired amount of clean, cold water into the Water Tank. Never exceed the
maximum level indicated.
3. Make sure that Coffee Pot is on the burner.
4. Close the Coffee Maker Lid and flip Selector Switch to the COFFEE/3 in 1 position.
5. While coffee is brewing, DO NOT open the Coffee Maker Lid as this could cause scalding.
6. When coffee has finished brewing, flip the Selector Switch to the COFFEE OFF position.
7. Unplug the appliance when coffee is brewed and allow the hot plate beneath the Coffee
Pot to cool completely before cleaning.
8. The coffee maker is equipped with a non-drip valve that will automatically operate to stop
drops of coffee dripping onto the hotplate. However, if any coffee splashes or drips onto
the hot plate beneath the Coffee Pot, clean it with a dry, non-abrasive cloth after the
appliance has cooled completely.
COFFEE MAKER
10
Tabla de contenido
