Trust SuperSpeed 2 Manual Del Usuario página 4

SuperSpeed 2 Port USB 3.0 Notebook ExpressCard – USER'S MANUAL
Eject device (Eject device)
There is no need to turn off your notebook when inserting/ejecting the card.
It is however recommended to use Windows' "Safely remove hardware" utility to stop the device, before
ejecting it
Click the "Safely remove hardware" icon
Click the "NEC Electronics USB 3.0 Host Controller" line
Click OK – The card can now be ejected
Press the card into your notebook's ExpressCard slot
A clicking sound indicates the card is released
You can now pull the card out of the ExpressCard slot
Optional power cable (Optional power cable)
Some devices might require more power than can be provided by your notebook's ExpressCard slot.
If your system warns you that your device is connected to a port that does not have enough power to support
it, use the Optional USB Power cable
Connect it to one of your laptop's USB 1.1 or USB 2.0 ports, and then to the Trust SuperSpeed 2 Port USB
3.0 Notebook ExpressCard's Optional Power connector
.
.
3