Inateck BCST-70 Guia Del Usuario página 4

Ocultar thumbs Ver también para BCST-70:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 74
Use of Inateck BCST-70
EN
Startup
Note:
1) Inateck BCST-70 will start sleep mode if there is no operation on it over 3 minutes.
Short press on the trigger can wake it up.
2) Bluetooth connection will be disrupted when the distance between BCST-70 and
the connected device is beyond the valid transmission range. Scanning result will
be saved in the buffer of BCST-70. Quickly double press on the trigger can upload
data from buffer.
Bluetooth Mode(HID):
1. Power on Inateck BCST -70 by toggling switch from OFF to ON.
2. Scan "Enter Setup" barcode and then "Bluetooth Pairing", BCST-70 will enter
Bluetooth pairing status.
Enter Setup
3. Enable the Bluetooth of the device to be connected, e.g. PC, cellphone or tablet.
You can do that like below.
Windows XP: Click Control Panel->Printers and Other Hardware->Add Bluetooth
Device
Windows 7/8/8.1: Click Control Panel->Add Devices
Windows 10: Click Setting->Devices->Bluetooth
macOS:Click System Preference->Bluetooth
iOS: Click Setting->Bluetooth
android: Clik Setting->Bluetooth
Enable the Bluetooth on host device and it will automatically search for BCST-70.
After a few seconds 'BCST-70******' will appear in the list of available devices. Pair
the two devices. A chords sound means successful pairing.
1
Bluetooth Pairing
Tabla de contenido
loading

Tabla de contenido