Adidas RPD-01 Guia De Inicio Rapido página 2

1 2
3 4 5 6
ENGLISH
GET STARTED
• Start with your headphones off. Press and hold the
middle control button until the LED turns blue and the
headphones are in pairing mode.
• Open the Bluetooth list on your phone and select
®
adidas RPD-01.
• Go to your favourite audio app and press play.
Get the adidas headphones app to activate more
features, configure the action button and complete
the setup.
1. TWIST FIT SYSTEM
The ear tips and the optional silicone ear wings
come in 4 different sizes that can be combined for a
perfect fit.
The ear wings ensure that the headphones sit
securely in place. If the ear buds tend to move or fall
out, try changing to a bigger ear wing size.
The ear tip size affects the acoustic properties of the
headphones.
• To change the size, first remove the ear tip and
then the ear wing by gently pulling them from the
headphones.
• Attach the new ear wing by stretching it into place and
making sure that the holes on the ear wing and ear
bud line up.
• Fasten the new ear tip on the ear bud. The ear tip is
oval and should match the orientation of the ear bud.
2. CONTROL BUTTONS
Use the control buttons on the right side to control
audio, start Bluetooth pairing mode and turn your
®
headphones on or off.
‫ ܟ‬Press middle button for 2 seconds to turn on or off
‫ ܟ‬With your headphones turned off, press middle button
for 4 seconds for Bluetooth pairing
‫ ܟ‬Press upper or lower button to change volume
‫ ܟ‬Press middle button to play or pause audio
‫ ܟ‬Double or triple press middle button for previous or
next track
‫ ܟ‬Double or triple press and hold middle button to
rewind or fast forward
‫ ܟ‬Handle calls:
‫ ܟ‬Press middle button to answer or end call
‫ ܟ‬Double press middle button to reject an
incoming call
3. USING THE ACTION BUTTON
Customise the action button behaviour from the
adidas Headphones app.
Go to SETTINGS and then ACTION BUTTON or tap
ACTION BUTTON from the home screen to get started.
After setup: single, double or triple click the action
button on the left side to access your actions.
For Spotify actions, make sure this app is running on
your phone.
A Spotify premium account is required for the Spotify
action button feature.
4. LED INDICATOR
Blue blinking Bluetooth pairing mode -
®
the headphones are ready
to be paired
White blinking Powered on, connected to a
Bluetooth device and audio
paused
Red-Orange-Yellow- Connected to a power
Green source and battery is
charging 0-100%
Red Powering off or
disconnecting from a
Bluetooth device
5. CHARGING YOUR HEADPHONES
Use the included USB cable to connect your
headphones to a power source. When the LED is
green your headphones are fully charged and can play
for approximately 12 hours.
6. WASHING YOUR HEADPHONES
Clean your headphones to keep them fresh and make
them last longer.
Note! Never rinse or submerge your headphones.
Do not use any detergents and do not leave your
headphones to dry in direct sunlight.
• Use a wet lint free cloth to gently wipe clean your
headphones.