Operation With Detergents; Regulation Of Pressure / Water Volume - Berner BHPC 150-1 Manual De Instrucciones

BHPC 150-1

4.7 Operation with detergents

DE
EN
FR
IT
ES
4.8 Regulation of pressure /
water volume
26
128303560_BHPC_150-1.indb 26 128303560_BHPC_150-1.indb 26
Application of detergents is
NOT possible if an extension
hose is applied.
1. Fill the container with a de-
tergent.
2. Mount the Flexopower Plus
spray lance and adjust it to
low pressure (see section
4.7).
3. Adjust the dosing regulator
(11) to the re quired vol ume
of detergent (0-5%).
4. Apply the detergent from
below and up wards.
5. Let the detergent act for the
time stated on the packing of
the detergent and fl ush with
pure water.
Separate detergent container
1. Remove the cover with suc-
tion hose from the detergent
container.
2. Mount the cover with suction
hose on the separate deter-
gent container.
The cover has a standard thread
and fi ts common detergent con-
tainers. If your container does
not have a standard thread,
detach the fi lter from the suc-
tion hose and remove the cover.
Remount the fi lter in the suction
hose.
Extra detergent hose can be
pulled out of the machine.
Working pressure and water
volume can be regulated on the
machine by turning the button
for regulation of pressure / wa-
ter volume (5).
Original Instructions
25-02-2011 10:34:38 25-02-2011 10:34:38