Idiomas disponibles
Idiomas disponibles
4.
As easy as...
1. Make sure you have Internet connection to
perform the device configuration correctly.
z2. Download Bevel App from Google Play or App
Store.
3. Assign a name to your home and define its location.
4. Register your Gateway in Bevel App by scanning the QR
code that is on the back of the device.
5. Install the Gateway. You must connect it to the current
through the micro USB cable and the power adapter, as well as
the router through the Ethernet cable.
6. When the 3 LEDs are on and steady, the Gateway installation will
be completed correctly.
7. Separate the two parts of the device, thermostat (A) and base (B).
8. Remove the base cover (B) by pressing both tabs.
9. Register the base (B) scanning the QR code that is on the device.
10. Register the thermostat (A) by scanning the QR code that is on the back
of the device.
11. Remove the thermostat's battery cover (A) and remove the safety tab. The
Internet Connection icon
will appear on the screen when the Internet is
connected.
12. Bevel App will confirm that the devices have been successfully connected.
Otherwise repeat the registration steps.
5.
6.
A.
7.
8.
B.
10.
9.
11.
11.
EN
13. CUT THE ELECTRICAL SUPPLY OF THE INSTALLATION AREA.
14. If you already have a thermostat installed, remove the front
panel and label the wires with the supplied stickers. Now, uninstall
the thermostat.
15. Introduce the climatization system specifications in Bevel App.
16. Make sure the switch is located to the left or to the right as indicated
in Bevel App.
17. Fix the base (B) to the wall with the supplied screws and insert the wires
through the rear opening. Connect them as shown in Bevel App.
18. Power on the installation area again. Your devices will connect to Internet,
this process can take up to 5 minutes.
19. Synchronize your devices by pressing the center button of the thermostat (A)
for 5 seconds and immediately press the button on the base (B).
20. When thermostat (A) and base (B) have been synchronized correctly, the
synchronization icon
will appear on the screen. Press next. Otherwise repeat the
previous step.
21. Replace the base cover (B).
22. Select Heat or Cool mode.
23. Set the thermostat (A) to the base (B) or the room you prefer.
Start enjoying your momit Bevel!
*For more details download the Installation Guide at momit.com
13.
14.
EN
E
G
O/B
W
16-18.
1
19.
1
