Tabla de contenido
tube (B) aligning the groove on
the pusher with the small ridge in
the feed tube.
• Your appliance is equipped with
a non-drip spout (G). Fit it (spout
downwards) on the pouring spout
(Fig. 5).
• Place a glass under the non-drip
spout in front of the appliance
(see Fig. 5).
• Plug in the appliance.
• To start the appliance, use the
control button (J).
• Cut the fruits or vegetables
into pieces if necessary after
removing the stones.
• Insert the fruits or vegetables
through the feed tube (B).
• The fruits and vegetables must
Ingredients
Apples
Pears
Carrots
Cucumbers
Pineapple
Grapes
Tomatoes
Celery
Do not use the appliance for more than 1 minute continuously.
(*) The quality and quantity of juice varies widely depending on the
freshness of the fruit or vegetables and variety of each vegetable or fruit.
The quantities of juice indicated above are therefore approximate.
Approximate
weight (g)
500
500
500
500 (about 1
cucumbers)
500
500
500
500
2
be inserted only while the motor
is running.
• Do not press too hard on the pusher
(A). Do not use any other utensil.
NEVER push food with your
fingers.
• When you have finished, stop the
appliance by turning the control
button (J) to 0 and wait until the
sieve (D) stops completely.
• When the pulp collector (H) is
full, or the juice flow slows down,
empty the pulp collector (H)
and clean the sieve (D) and the
cover (C).
• After making your juice, turn the
non-drip spout (G) by 180° before
removing the glass to stop the
juice flow (see Fig. 6).
Quantity of juice obtained in
ml (*) 1 glass = 200 ml
(approximately)
300
300
300
300
150
200
300
300
Tabla de contenido
