Cleaning And Maintenance; Protecting The Environment - Black and Decker EK30 Manual De Instrucciones

Removing the blades from the handle
(fig. A)
Remove the mains plug from the
socket.
While holding the knife over the
worktop with one hand, grip the blades
by the guard (5) with the other hand.
Push the blade release button (3). The
blades will be ejected from the handle.
Never push the release button (3)
during use.
Use
Switching on and off (fig. A)
Make sure that the cord is well away
from the blades.
Press the on/off switch (1) to switch
the appliance on.
Releasing the on/off switch (1) will
switch the appliance off.
Do not operate the appliance for more
than five minutes. After operating the
appliance continuously for this period of
time, let it cool for at least 10 minutes
before using it again.
Using the fine tooth blade
The fine tooth blade (6) can be used for
general cutting purposes.
Always place the food to be sliced on a
plastic or wooden cutting board. Never
use metal or ceramic cutting boards.
Allow cooked meats to stand for 10 to
15 minutes before slicing. This allows
the juices to set and makes carving
easier and neater.
Do not force the blade through the
food. A sawing action is not necessary.
Use a carving fork to steady the meat.
This will help to carve straight slices.
Remove any skewers before carving
meat or chicken. String can be left
around rolled meat.
To keep the blades sharp, do not cut
through bones, pips or stones.
Using the coarse tooth blade
The coarse tooth blade (7) can be used
for cutting frozen foods.
ENGLISH

Cleaning and maintenance

Warning! Switch the appliance off and
unplug it before cleaning or maintenance.
Cleaning the blades
Remove the blades from the knife
handle (2) and unlock the blade tips.
Wash the blades in hot soapy water.
Do not use scouring powder or
scouring pads. The blades can also be
cleaned in a dishwasher.
Thoroughly rinse and dry the blades.
Slide the blade sleeve over the blades
Do not attempt to sharpen the blades.
Cleaning the knife handle
Warning! Do not immerse the appliance,
the cord set or the plug in water or any other
liquid.
Remove the blades from the knife
handle (2).
Wipe the knife handle (2) with a damp
cloth.
Mains plug replacement (U.K. &
Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
Connect the brown lead to the live
terminal in the new plug.
Connect the blue lead to the neutral
terminal.
Warning! No connection is to be made to
the earth terminal. Follow the fitting
instructions supplied with good quality
plugs. Recommended fuse: 5 A.

Protecting the environment

Separate collection. This
product must not be disposed
of with normal household
waste.
Should you find one day that your
appliance needs replacement, or if it is of
no further use to you, think of the
protection of the environment. Black &
Decker repair agents will accept old Black
& Decker tools and ensure that they are
disposed of in an environmentally safe
way.
5