Tabla de contenido
WARNINGS - BEFORE PUTTING INTO OPERATION
• Before putting it into operation, make sure that the voltage of the grid is
compatible with that one which is indicated in the power supplier.
• Before putting the product into operation, check out that it is not dama-
ged.
ASSEMBLY INSTRUCTIONS: SAFE INSTALLATION
GENERAL
• Do not use any metal tool or material which lead to a cut in the thread.
Those might damage the product, cause short-circuits or a bad performance
of the product.
• Take into account that the useful life of the product depends considera-
bly on the way it is mounted, dismounted and deposited.
• Treat it always carefully and properly.
ASSEMBLY
• For the assembly ( ex. steel cable), use preferably UV-resistant seals or
original accessories
ASSEMBLY:
1
Place the product wherever you
want, taking into account the
transformer's cable length.
2
Check the connection.
3
Connect the plug to the electric
power.
• Mount always this product the most stable and right possible. Do not let
this product hang freely.
• Make sure that the minimum distance of 1.5 cm between cables and
lamps is not exceeded.
• In operation, lamps and cables must not be touched, crossed or being
rolled or twisted.
ASSEMBLY INSTRUCTIONS: SAFE EXTENSION
• Do not connect between each other more products than those which
are authorised.
• Take into account the fact that the maximum quantity of products
connected which you will find on the upper chart of the package or in our
catalogue.
RECOMMENDATIONS
Reviewing all connections and splices motives and Christmas products is re-
commended before and after their operation in each campaign to prevent
condensation and expansion joints.
We recommend uninstalling the product at the end of each campaign.
3m
!
Tabla de contenido
