Idiomas disponibles
Idiomas disponibles
Quick Start Guide - GB
Panel sketch map (scheme E)
1. Power key
2. Sources
3. Menu
4. Indicator light
5. Direct operation key
Turn on the projector
1. Before using the remote control, fix two batteries in it.
2. Turn on the power switch on the backboard, the power
light will begin to flash.
3. Press the power key on the remote control or panel, the
indicator light will change to
blue color.
4. After a few seconds , the lamp begins to work.
5. If using for the first time, the image may appear blurry or
have trapezoid distortion.
If the image is blurry, turn the lens clockwise, then turn it
counter clockwise slowly. When the whole image is as clear
as the middle area of it, it will be the best position of the
lens.
If a projected image has trapezoid distortion, correct ima-
ge with keystone adjustment. Distortion occurs when the
screen or projector is not leveled. Reposition the projector to
improve its angle to the screen. However, the circumference
of the image may still be less focused.
6. You may also re-setup the system parameters anytime.
You can choose from various picture, sound and time ad-
justments, easily accessible with a remote and with a panel.
Turn off the projector
1. While using the projector, by pressing „power" key, the
projector will turn to standby mode. WARNING: The lamp
will shut off, while the fan will still be working for a little
longer. The projector will shut off automatically when the
fan stops. DO NOT unplug the power cable before you turn
7
