Idiomas disponibles
Idiomas disponibles
Quick Start Guide - GB
7. Before plug in the power, please make sure the voltage of
your area matches this projector (230V - 110V).
8. Only plug into the three pin plug and make sure you use
ground wire.
9. Before use make sure the cable is not damaged.
10. When there is thunder or when not using the projector
for a long period of time , unplug the power cable.
11.Due to high voltage, do not open or try to repair the
projector by yourself. Refer to a professional technician if
repair is needed.
12. You should not place the projector around any heat so-
urces. It can shorten its life expectancy. Optimal working
temperature of the projector is 0 ~ +30°C.
13. The total voltage of the connected devices shall not be
over 1000mAh,the problems caused by the wrong operation
will not be warranted.
14. Ensure min. 15 cm of free space around the projector
for its proper ventilation. Do not cover the air holes of the
device.
Correct dosposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other Eu-
ropean countries with separate collection systems)
This marking indicates that at the end of its wor-
king life this product should not be disposed of with
other household waste in the EU. To prevent possi-
ble harm to the environment or human health from
uncontrolled waste disposal, please separate this
from other types of wastes and recycle it respon-
sible to promote the sustainable reuse of material
resources.
To dispose of your used device, please use the re-
turn and collection systems available in your area
or contact the retailer where the product was pur-
chased. They can take this product for safe environ-
mental recycling.
10
