Idiomas disponibles
Idiomas disponibles
Quick Start Guide - GB
Warnings and safety precautions
1. You should clean the lens whenever you notice any dirt or
smudges. Unplug the power cable before cleaning the lens.
We recommend only using a soft cloth to clean it.
2. In order to get the best results, clean the filter at least
once a month. If the projector is used in a dirty environ-
ment, we recommend to repeat the routine more often. In
case of neglecting maintenance actions, the device can be
prone to permanent damage of image display module and
the producer does not take any responsibility for that. Cle-
aning the filter should only be done with a use of compres-
sed air in a direction opposite to its slot.
3. Never use any abrasive pad, alkaline/acid cleaner or vola-
tile solvent such as alcohol, benzene. 4. Only use standard
accessories, otherwise the device can get damaged.
5. Do not place the device on a wet or damp surface or aro-
und any containers with water. Keep the projector away from
fire and heat sources.
9
