Fitting The Backrest - Invacare Aquatec Ocean Manual De Instrucciones

Shower and Toilet Commode Ocean / Ocean XL
Fitting the base stabilization tube (Ocean XL only)
1. Fit the base stabilization tube
and nuts supplied between the side parts C.
B
8
using the screws
A

Fitting the backrest

1. Secure all four wheels. To do this, press down on the red foot lever
on the wheels.
IMPORTANT
▸ Ensure that the armrests point forward when in the unfol-
ded position.
B
A
2. Insert the backrest from behind into the seat frame E, until the
D
collar abuts the seat frame tube F.
C
IMPORTANT
▸ Firmly tighten the screws using the Allen key supplied.
▸ Check the screws regularly to ensure they are sitting
securely.
3. Position a washer on each screw
B
each side.
4. Tighten the screws with a torque of 5 Nm.
Assembly and installation
and secure the backrest on
A