Vacuum Blower Assembly; Assembly - Fieldmann FZF 4020 E Manual Del Usuario

EN 10
Assembling the vacuum blower
Description of the power tool (fig. 1)
1. On/Off trigger
2. Power cord retainer
3. Power adjustment dial
4. Vacuum unit
5. Vacuum / blower mode selection lever
6. Collection sack
4. ASSEMBLING THE VACUUM BLOWER
Warning! This vacuum blower must not be used or turned on until it is fully assembled.
DISCONNECT THE POWER CORD from the power grid before starting the assembly of the vacuum blower.

Assembly

Insert the top part of the tube (fig 1, point 9) into the vacuum blower unit (fig 1, point 4) and make sure that it
is correctly seated. Then secure it in place using the two included screws. Then connect the bottom tube with
wheels (fig 1, point) to the top tube. Check that it is inserted correctly, pushed in all the way and secured in place
using the two included screws.
7. Support wheel
8. Bottom part of the vacuum tube
9. Top part of the vacuum tube
10. Handle
11. Power plug
FZF 4020 E