Tabla de contenido
Personal safety
Always pay full attention and concentrate on your work and proceed prudently when working with power
tools. Do not use the power tool if you are tired or under the influence of drugs, alcohol or medication. When
working with power tools, a single brief moment of inattentiveness may lead to very serious injuries.
Use personal protective equipment. Always use safety glasses. Using personal protective equipment such as
dust masks, safety footwear with anti-slip soles, safety helmets or earmuffs (appropriate to the actual work
conditions) reduces the risk of injury.
Prevent the power tool from being accidentally turned on. Make sure that the On/Off trigger switch is in the
"OFF" position before plugging it into a power socket. Carrying power tools with the finger on the ON/OFF
trigger switch and plugging turned on power tools into a power socket increases the risk of injuries.
Remove all adjustment tools, i.e. screwdrivers before turning on the power tool. A screwdriver or other tool
located in the rotating part of the power tool may cause injuries.
Do not lean too far forward. Always maintain a stable stance. This will enable better control over the power
tool in unexpected situations.
Wear appropriate clothing. Do not wear any loose clothing or any decorations. Keep hair, clothing and gloves
at a safe distance from moving parts. Loose clothing, decorations or long hair may become caught in the
moving parts.
If it is possible to mount attachments for suction or dust collection, check that they are properly connected
and that they are used correctly. Using these attachments reduces dust related hazards.
Operating and maintaining power tools
Do not overload the power tool. Always use suitable power tools for your work tasks. Using suitable power
tools will make your work better and safer within the scope of the given performance range.
Do not use the power tool if it cannot be turned on and off using the On/Off trigger switch. A power tool that
cannot be turned on or off using the intended On/Off trigger switch is dangerous and must be repaired.
Always unplug the power plug from the power outlet before carrying out settings, changing a part of the
accessories or when putting the power tool out of operation, i.e. storing it. This preventative measure reduces
the risk of accidentally starting the power tool.
Store an unused power tool out of reach of children and do not permit the power tool to be used by persons
that are not acquainted with the power tool and the provided instructions. Power tools are dangerous when
used by inexperienced persons.
Keep you power tools in good order. Ensure that it is correctly setup and that moving parts are properly
attached and generally pay attention to cracked parts and other defects, which could have an effect on the
proper operation of the power tool. In the event of defects, have the power tool repaired before using it. Many
accidents are caused by poorly maintained power tools.
Use the power tool as well as all accessories and respective tools according to the included manuals in the
correct manner for the given type of CZ-4 tool; whilst respecting the work conditions and the defined manner
of work. Using the power tool for work different to the defined form of work may lead to dangerous situations.
Have your power tool repaired only by qualified professional personnel with the exclusive use of original
spare parts. This will ensure that the safety of your power tool is maintained.
ELECTRIC GARDEN VACUUM BLOWER
7
Safety Instructions
USER'S MANUAL
EN
Tabla de contenido
