Tabla de contenido
EN
14
Maintenance, storage and repairs
7. MAINTENANCE, STORAGE AND REPAIRS
Warning! Disconnect this power tool from the power source before cleaning and before carrying out any
standard maintenance.
Only store this power tool in a dry place that is protected against light and frost.
Make sure that children do not have access to this power tool.
a) Keep all nuts and bolts securely tightened to the power tool so as to ensure its correct function.
b) Never leave material inside the power tool or in the collection sack. This may create a hazard when the
vacuum blower is turned on again. Remove and empty out the collection sack. Check the normal function of
the mode selection lever and check that it is not clogged with material. Using a suitable brush, clean out the
area near the fan and inside the tube of the vacuum blower so that all material is removed. Do not use any
type of solvent on the plastic parts of the vacuum blower.
c) Frequently check the degree of wear and tear on the collection sack.
d) Replace worn out or damaged parts with original spare parts or accessories. All damaged and worn out
parts must be replaced to ensure the good operating condition of the vacuum blower.
Have repairs performed at an authorised service centre that will use only original spare
parts.
FZF 4020 E
Tabla de contenido
