Important; Grounding The Generator - Porter Cable BSV550-W Manual De Instrucciones

9. On other handle depress snap button (9), slide into handle bracket, and
release through first slot in handle bracket as shown. Secure handle to
handle bracket with screw (7) and flange nut (8).
7
10. Attach handle bracket assemblies to frame with screws (7) and flange nuts
(8). Tighten securely.
NOTE: Orientation of handle assemblies to frame will depend on how the
operator wishes to operate snap button (9). If snap button is assembled to
outside of the generator frame the fingers will operate it. If snap button is
assembled to inside of the generator frame the thumbs will operate it. The figure
shows the snap button assembled to inside of generator frame
11. Remove shipping block from under the gen head. Unscrew bolt and remove
the shipping block. It is very important that this is removed before starting
your generator.
12. Carefully tilt the generator to operating position.
13. The portability kit is now ready for use.
14. To lower handle, depress snap button and fold handles down.
15. Raise handles and allow snap button to snap into place.
parts can result in serious injury. Keep children away from
the generator at all times. They may not be able to recognize
the hazards of this product.
OTHER LOOSE PARTS
1. Oil is supplied, see engine operators manual for correct procedure to add oil
and fuel to engine.
IMPORTANT: Before any attempt to start your gen er a tor be sure to check engine
oil (See Engine Operator's man u al)

GROUNDING THE GENERATOR

A grounding lug is supplied with the generator for
use when required by local electrical ordinances.
Refer to article 250 of the Na tion al Elec tri cal Code to
clarify any needed ground ing information. Your local
electric com pa ny or a certified electrician should be
able to help you with this in for ma tion.
combustible materials or gases for the grounding point.
A16596
9
9
Risk of moving parts. Keep fingers away
from all moving parts. Contact with moving
Risk of fire. Do not use metal
pipe that is being used to carry
7
10- ENG
9
8
Grounding Lug