Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operating Instructions
Remote Controller
CAUTION: The Remote Controller will not function properly if strong
light strikes the sensor window of the air conditioner or if there are
obstacles between the Remote Controller and the air conditioner.
Power
Operation starts when this button is pressed and
stops when you press the button again.
Temperature Control
The thermostat monitors room temperature to
maintain the desired temperature.
The thermostat can be set between 60 F~86 F
(16 C~30 C).
The unit takes an average of 30 minutes to adjust the
room temperature by 1 F.
Fan Speed
For increased power while cooling, select a higher
fan speed.
3 steps: High Low Med
On/Off Timer
The timer can be set to start and stop the unit in
hourly increments (up to 12 hours).
Operation Mode Selector
Select cooling mode to cool the room.
Select energy saver mode for energy saving
operation.
Select fan mode for basic ventilating fan operation.
Select dry mode for dry operation.
How to Insert Batteries
1. Remove the cover from the back of the remote
controller
2. Insert two batteries.
Be sure of the polarity when installing the
batteries.
Be sure that both batteries are new.
3. Re-attach the cover.
18 Room Air Conditioner
Power
Temp
Fan Speed
Timer
Mode
Auto
Swing
Do not use rechargeable
batteries. Such batteries
differ from standard dry cells
in shape, dimensions, and
performance.
Remove the batteries from
the remote controller if the air
conditioner is not going to be
used for an extended length
of time.
Tabla de contenido
