Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operating
Instructions
Controls
CAUTION: The Remote Control unit will not function properly if strong light strikes the sensor
window of the air conditioner or it there are obstacles between the Remote Control unit and the
air conditioner.
1. POWER BUTTON
Operation starts, when this button is pressed and stops when you press the button again.
2. AUTO SWING (Optional)
The vertical louver swings horizontally by the automatic system and stops when you press the button again.
3. ROOM TEMPERATURE SETTING BUTTON
Control the room temperature within a range of 16°C to 30°C
4. FAN SPEED SELECTOR
Select the fan speed in three steps {High[F3]
5. OPERATION MODE SELECTION BUTTON
Select Cooling, Fan, or Dehumidification mode with this button.
6. ON/OFF TIMER BUTTON
Set the time of starting and stopping operation. The timer is set by 1 hour.
7. SIGNAL RECEIVER
AUTO RESTART
In failure of electric power, the unit runs as previous setting operation.
How to Insert the Batteries
1. Remove the cover from the back of
the remote controller.
2. Insert the two batteries.
3. Re-attach the cover.
Remote Control Operation
Low[F1]
• Do not use rechargeable batteries, such batteries differ from
standard dry cells in shape, dimensions, and performance.
• Remove the batteries from the
remote controller if the air
conditioner is not going to be
used for an extended length
of time.
10
Med[F2]
High[F3]...}.
Capítulos
Tabla de contenido
