Kärcher WD 3 Battery Manual De Instrucciones página 15

 Do not vacuum up reactive
metal dusts (e.g. aluminium,
magnesium or zinc!
 Do not vacuum up undiluted
acids or brines!
 Do not vacuum up burning or
smouldering objects!
WARNING
Risk of injury!
 Do not vacuum in the vicinity
of the head when using the
nozzle and suction pipe.
CAUTION
 In order to prevent accidents
or injuries, mind the weight of
the appliance during trans-
port (see technical data).
Stability
CAUTION
 Create stability for the appli-
ance prior to any work on or
with the appliance to prevent
accidents or damage.
Information on battery and charger
CAUTION
– Risk of injury, risk of damage due to exploding bat-
tery! Only charge the battery packs with the appro-
priate charger.
– Please check that the battery pack and charger
match before use!
– Only use batteries that are free of damage.
– Modifications and changes that are not authorised by
the manufacturer are prohibited for safety reasons.
– Any other use is prohibited. The user is liable for
any hazards arising from improper use.
 A battery and charger with 36 V nominal voltage is
required for the initial startup. The "Set variants" al-
ready include a Li-ION battery with 36 V, 2.6 Ah (Li-
ION 36-26 DW battery) and a 36 V (BC 36 V) quick
charger in the scope of delivery.
Alternatively, all 36 V batteries and chargers of the

KÄRCHER 36 V platform can be used.
 Batteries / chargers that are not supplied in the
scope of delivery or are additionally required are
available as special accessories or can be pur-
chased later.
 Before using the quick charger and battery pack,
please observe the operating instructions of the de-
vice used and any safety instructions enclosed.
 More information on the operating instructions for
battery packs or on accessories and spare parts
can be found at www.kaercher.com.
36 V system battery packs
Li-ION 36-26
DW
Li-ION 36-52
DW
 The lithium-ion battery is subject to the require-
ments of dangerous goods regulations and can be
transported by the user in public traffic areas with-
out any further restrictions.
 When shipping by third parties (transport compa-
nies), special requirements for packaging and la-
belling must be observed.
Only send the battery if the casing is undamaged.

Tape off open contacts and pack the battery tightly
and securely. It must not be able to move in the
packaging.
 Please also observe the national regulations.
CAUTION
 Safety installations serve the protection of the user
and may not be modified or bypassed.
The installed protective circuit protects the battery pack
against
 Overheating
 Full discharge
 Overcharging
 Short-circuit
– 7
EN
V Ah Ah
36 2,5 2,6
36 5,0 5,2
Transport
Safety Devices
Protective circuit
2.445-...
-002.0
-003.0
15