Trevi KBB 310 BT Guia Del Usuario página 8

DC INPUT OPERATION
Plug the supplied USB cable to the mini USB power socket on the left side of the unit
and a computer's USB socket or an applicable AC/DC adapter (optional). Connect the
adapter (optional) to the main power or power on the computer.
NOTE: Once connect the unit to the main power, the power/charge indicator will light green.
If play the unit with the battery, the indicator will not light except the unit is low power.
NOTE: If not any audio signal inputs to the unit in about one hour, the unit will switch off
automatically (except at radio mode).
BLUETOOTH OPERATING
This unit can receive stereo audio signal from a BLUETOOTH stereo audio source device.
1. Power on the unit by pressing the STANDBY/ON button, switch to
BLUETOOTH mode by pressing SOURCE repeatedly, "bt" shows on the display.
2. LED indicator rapid blinking while it is pairing.
3. Pair and connect to KBB 310 BT on the BLUETOOTH audio source device. If
prompted for passcode, enter "0000".
4. Pairing successful (LED indicator lights solid blue), ready to stream music.
5. Press the PAIRING/PLAY/PAUSE button to pause/resume the playback.
6. During playback, press the SKIP DN/TUN- button once to go back the
beginning of the current track, press the SKIP DN/TUN- button twice
continuously to skip to the previous track.
7. During playback, press the SKIP UP/TUN+ button to skip to the next track.
8. During playback, press and hold the SKIP DN/TUN- or SKIP UP/TUN+ button to search
through the track backward or forward.
Note:The above are generic steps to pair a BLUETOOTH device, for more specific instructions
on BLUETOOTH connectivity for your device, please consult your manufacturer's manual.
After the first connection, the unit will detect your last paired BLUETOOTH device and
connect to it automatically.
RE-CONNECT TO THE BLUETOOTH AUDIO SOURCE DEVICE
If the device is already paired with the KBB310BT, but became unconnected even with
both Bluetooth devices turned on. You can re-connect them by following steps:
1. Press and hold the PAIRING/PLAY/PAUSE button to re-link the audio source
device. The Bluetooth indicator will blink.
2. Select KBB310BT on the audio source device for connecting. Bluetooth indicator
will turn to solid blue if the KBB 310 BT and the device have been re-connected
successfully.
FM RADIO
TUNING THE FM RADIO
1. Power on the unit, switch to the radio mode by pressing the SOURCE button
repeatedly until the LED display shows the radio frequency.
2. Extend the FM TELESCOPIC ANTENNA on the left side of the unit fully for best
reception.
8
3. Press the SKIP UP/TUN+ or SKIP DN/TUN- button to fine tune radio station.